Starting Your Pc Workstation For The First Time; Initializing Your Software - HP Kayak XU User Manual

NOTE

Starting Your PC Workstation for the First Time

If your PC Workstation has preinstalled software, it is initialized the
first time you start the PC Workstation. The software initialization
process takes a few minutes. This process sets up the software in your
language and sets up your software to use the hardware installed in
your computer (you can change the settings after the software has
been initialized).

Initializing Your Software

Do NOT switch OFF the PC Workstation while the software is being
initialized—this could cause unexpected results.
To initialize your software:
1 Turn on the display first, and then the PC Workstation.
When the PC Workstation is switched on, the HP PC Workstation's
logo is displayed. The PC Workstation performs a Power-On-Self-
Test (POST). Press
HP Summary Screen (see "The HP Summary Screen and Setup
Program" on page 92).
If an error is detected during the Power-On-Self-Test, the
PC Workstation will automatically display the error. You may be
prompted to press
error.
2 The software initialization routine starts. It displays the software
license agreement, gives you an opportunity to read Working in
Comfort (ergonomic advice for computer users), and then asks
questions about the PC Workstation. For example:
The name of the person who will use the PC Workstation and your
•
company name. (If necessary, the name of the user can be
modified later.)
The current date and time.
•
The type of printer (for example, HP LaserJet 5L). This is shown
•
on the front of the printer. You also need to enter the connection
used by the printer.
1 Setting Up and Using Your PC Workstation
Starting and Stopping Your PC Workstation
if you want to view the POST details in the
to start the Setup program to correct the
11