Hyundai HX145LCR Manual page 590

(10) Install cover (123), thrust plate (150), plug (301,
128) and socket bolt (124) into the hub (105).
Apply grease to the cover (123) after installed
O-ring (127).
(11) Pressing the oil seal
Insert the oil seal (32) by hit the pressurize jig with
plastic hammer.
Apply grease to the seat of oil seal (32).
3.4
CHECKING FACTS AFTER ASSEMBLY
1) AIR TEST OF REDUCTION GEAR
Disassemble plug (128) of reduction gear part. When compressed air (0.3 kgf/cm
water during the 2 minutes, it should be not happened air bubble.
Fill the gear oil.
Oil amount : 3.0 liter (0.79 U.S.gallon)
2)
AIR TEST OF HYDRAULIC MOTOR
One port should be opened, the others port should be closed. When compressed air (3 kgf/cm
inserted opened port in water during the 2 minutes, it should be not happened air bubble.
Fill the hydraulic oil.
Oil amount : 0.55 liter (0.15 U.S.gallon)
Oil seal
8-119
14098TM60
Pressurerize jig
Flange holder
14098TM76
2 ) is inserted that in
2 ) is