2)
DISASSEMBLY
(1)
Choose a clean place, remove contaminants
(dust, etc) and cleans motor before placing it on
worktable.
Lay the rubber plate on worktable and take care
not to damage the component.
(2)
Remove the connector (45) using 21 mm socket
wrench.
(3)
Remove plug (41) using 21 mm socket wrench.
(4)
Disassemble parallel pin (43) and spring (44).
Do not lose spring.
Do not mix spring with other springs.
8-148
125LCR8TM02
125LCR8TM03
125LCR8TM04
125LCR8TM05