Hyundai HX145LCR Manual page 588

(2)
Install angular bearing (125) and snap ring (106)
into the hub (105).
Be careful for the insert direction.
(3)
Insert the O-ring (130), the sealing (129) and fl oat-
ing seal (102) in the hub (105).
Apply grease to the fl oating seal (102) thinly.
(4) Install the spindle (101) into the hub (105) assem-
bly.
(5) Tighten the nut ring (103) and plug (104) into the
hub (105) to the required torque.
Do not wind the seal tape to the plug (104).
Punch two place for not to loosen the plug (104).
Tightening torque : 3.5 0.7 kgf m (25.3 5.1 lbf ft)
Hexagon socket 8
Torque wrench
8-117
14098TM72
14098TM73
14098TM67
14098TM66