Hyundai HX145LCR Manual page 573

Remove the ball bearing (50) from the rear fl ange
(1).
(8)
Disassembling the brake valve part
Remove two plugs (24) from the rear fl ange (1).
User can work easily if sub-disassembly was
done on the reversal table.
Tools
Hexagon wrench 36
Torque wrench
Take out two spring retainers (25), two springs (28)
from the rear fl ange (1).
Remove the spool (23) from the rear fl ange (1).
Be careful not to damage the outer surface of
the spool (23) and the sliding surface of the rear
fl ange (1).
Since the rear fl ange (1) and the spool (23) are of
the selective fi tting type, replace them together as
a kit even if only one of the two parts is damaged.
Remove two plugs (26) from the rear fl ange (1).
User can work easily if sub-disassembly was
done on the reversal table.
Tools
Hexagon wrench 10
8-102
14098TM12
14098TM13
14098TM14
14098TM15