Hyundai HX145LCR Manual page 568

3. DISASSEMBLY
3.1
GENERAL PRECAUTIONS
1) Spread rubber or vinyl cover on the work bench.
2) When disassembling the travel motor, provide a match mark on the mating face or each part.
3) Arrange the detached parts to prevent them from being damaged or lost.
4) The disassembled seals must be replaced with new ones as a rule even if they are free from dam-
age. For disassembly, therefore, prepare new seals in advance.
3.2 DISASSEMBLY PROCEDURE
1)
When inspecting or repairing the travel motors, use the disassembling procedures described below.
2)
Numerals in brackets ( ) following the part name denote the item numbers used in the structure
drawing at page 8-68.
3)
Prior to disassembly, install the travel motor on a inversion working bench.
3.3
DISASSEMBLING ORDER
DISASSEMBLING THE REDUCTION GEAR
1)
PART
(1) Remove plugs (128, 3EA) and drain the reduction
gear oil.
(2)
Loosen socket bolts (124, 16EA) and remove the
cover (123).
Remove the cover (123), after hook it, fit the
eye bolt in a screw hole for use of the plug (128). If
it's impossible, please remove the cover using the
rod.
You can have diffi culty removing it because loctite
is spread in the socket bolt (124).
Tools
Hexagon wrench 6, 8
(3)
Remove thrust plate R (122) and drive gear (121).
8-97
14098TM60
14098TM61