Hyundai HX145LCR Manual page 493

(5) Fit feedback lever (611), matching its pin
hole with pin hole in spool.
Then insert pin (874).
Insert pin in feedback lever a little to ease
operation.
Take care not to mistake direction of
feedback lever.
(6) Put pilot piston (643) into pilot hole of
casing.
Confirm that pilot piston slides smoothly
without binding.
(7) Put pin force-fitted in lever (2, 613) into
groove of pilot piston.
Then fix lever (2).
(8) Fit center plug (614) so that pin force-
fitted in center plug (614) can be put into
pin hole of lever (2).
Then install prevention plug (858).
(9) Insert adjusting plug (615) and fit locking
ring.
Take care not to mistake inserting holes
for fulcrum plug and adjusting plug.
At this point in time move feedback lever
to confirm that it has no large play and is
free from binding.
(10) Fit return spring (654) and spring seat
(653) into spool hole and attach snap ring
(814).
Lever (1) side
8-30 8-30
Lever (2) side
(fulcrum plug of
adjusting plug side)
(210-7) 8-28
(210-7) REG11
(210-7) REG12
(210-7) REG13