Hyundai HX145LCR Manual page 481

(3) Fit tilting bush (214) of swash plate (212)
to tilting pin (531), and fit swash plate
(212) with shoe plate (211) to swash plate
support (251) correctly.
Confirm with fingers of both hands that
swash plate can be removed smoothly.
Apply grease to sliding sections of swash
plate (212) and swash plate support
(251), and drive shaft (111, 113) can be
fitted easily.
Take care not to damage shoe plate (211)
surface.
(4)
To pump casing (271, 272), fit drive shaft
(111, 113) set with bearing (123), bearing
spacer (127) and stop ring (824).
(5)
In assemble of front pump, assemble seal
cover (F) (261) to pump casing (271) and
fix it with hexagon socket head bolt (406).
Apply grease lightly to oil seal in seal
cover (F) (261).
For assemble oil seal (774), taking full
care not to damage it.
(6)
Assemble piston cylinder subassembly
[cylinder (141), piston subassembly (151,
152), set plate (153), spherical bush (156)
and cylinder spring (157)]. Fitting spline
phases of cylinder, spherical bush (156)
and drive shaft (111, 113), insert piston
cylinder subassembly into pump casing
(271, 272).
8-18 8-18
140Z98MP24
140Z98MP25
140Z98MP26
140Z98MP27