Hyundai HX145LCR Manual page 645

11) After assembling nut ring (4) by using the jig,
disassemble the clamping.
Tightening torque : 60 kgf · m (434 lbf · ft)
Place lock plate (5) on the nut ring groove.
12)
Select best position from one of 4 casing hole to
assemble lock plate.
13) Place lock plate th the direction which nut ring is
loosed and then assemble M10 bolt (6) with M8
screw (19) after spreading loctite #242.(Refer to
assembly detail drawing)
Tightening torque (M10) : 5.5
Tightening torque (M8) : 2.7
Make sure that M8 bolt doesn't stick out of lock
plate.
Assembly detail drawing lock plate.
0.6 kgf · m
(39.8 4.3 lbf · ft)
0.3 kgf · m
(19.5 2.2 lbf · ft)
8-173
125LCR8TM100
125LCR8TM101
125LCR8TM102
125LCR8TM103