(23)
After fixing drive shaft so that it does not fall,
and then turn it over, press taper bearing (4).
(24)
Assemble nut ring (5) by using the jig.
Tightening torque : 3.5 0.4 kgf · m
(25.3 2.9 lbf · ft)
(25)
Place lock plate (6) on the nut ring.
(26)
After spreading loctite #242, assemble the
bolt (7) (4 pcs).
Tightening torque : 2.5 0.25 kgf · m
(18.1 1.8 lbf · ft)
8-70-6
125LCR8SM106
125LCR8SM107
125LCR8SM108
125LCR8SM109