Hyundai HX145LCR Manual page 644

7) After turning ring gear over, assemble bearing the
same way.
Be care of nick and safety when turn ring gear
over.
8) Assemble folating seal assembly (3) by usingthe
jig.
After assembling, wipe steel-lined section with
alcohol.
Flatness deviation has to be less than 1 mm.
9) Place folating seal assembly on the motor assem-
bly then assemble it.
After assembling, wipe steel-lined section with
alcohol.
Flatness deviation has to be less than 1 mm.
10) After arriving safely ring gear sun assembly inthe
motor assembly, press it with press machine.
After press-fitting, clamp ring gear to fixit.
When using the press pay attention to bearing
damage.
8-172
125LCR8TM96
125LCR8TM97
125LCR8TM98
125LCR8TM99