Hyundai HX145LCR Manual page 585

Mount the rear fl ange (1) on a working bench that
the mounting side of the spindle (101) faces up-
ward.
Install valve (19), spring (20) and valve seat (18) in
that order.
After new ring (22) bend somewhat and put the
valve seat (18), then into the rear fl ange (1) ring's
groove.
Do not reuse the ring (22).
Install ball bearing (50) into the rear fl ange (1).
Apply hydraulic oil to the ball bearing (50).
Install parallel pin (41) into the pin hole of rear
fl ange (1).
8-114
14098TM49
14098TM50
14098TM51
14098TM11