3)
Assemble planetary gear No.1 (14) of which
groove is faced downward. (3 places)
4)
Assemble thrust plate No.1(17).
5)
After spreading loctite #242, assemble the M8 bolt
(18).(3 pcs)
Tightening torque : 2.7
After the assembly, instantly check the noise and
interference by rotatong the gear.
6)
First, place bearing (2) on the ring gear (1), then
put jig on it, then press it with press machine.
0.3 kgf · m
8-171
125LCR8TM92
125LCR8TM93
125LCR8TM94
125LCR8TM95