Hyundai HX145LCR Manual page 523

(27) Apply grease on steel side of valve plate (20) to
prevent plate from sliding.
Assemble valve plate with the copper side facing
upwards.
※
Pay attention to the assembly direction.
※
Take care not to damage sliding surface.
(28) Assemble valve casing by matching its holes
and pins of casing and parking piston. And
tighten bolt; socket (42) (4EA) using 12 mm
hexagon wrench.
※
Tightening torque : 17.5 kgf · m (127 lbf · ft)
※
Make sure valve plate stays in place.
※
When tightening bolts, make sure mating
surfaces between casing and valve casing
maintain parallel to each other.
(29) Assemble relief valve assembly (31) using
36 mm socket wrench in valve casing.
※
Spread grease on O-ring part of relief valve
assembly.
※
Tightening torque : 18 kgf · m (130 lbf · ft)
(30) Assemble snap ring (4) in shaft by using snap
ring plier.
8-60
125LCR8SM49
125LCR8SM50
125LCR8SM51
125LCR8SM52