Hyundai HX145LCR Manual page 693

(3) Assembly
Before assembly, clean the parts.
Coat the sliding surfaces of all parts with
oil.
Cool up bushing (4) fully by some dry ice
and press it into shell (1).
Do not press it at the normal temperature,
or not knock in with a hammer even after
the cooling.
Coat O-ring (6) with grease thinly, and
install it to shaft (2).
Insert shaft (2) into bracket (5) and drive
in the spring pin (7).
Install seal (3) to shell (1) and bracket (5).
Install shaft (2) to shell (1).
1 4
8-221 8-221
Press
8-167(1)
6
2
5
7
8-167(2)
3
8-167(3)
2 1
8-167(4)