(3)
After applying grease on steel ball (10), insert
steel ball in casing.
(4)
After assembling piston seal (5) and steel ball (9)
in 1, 2 speed piston (4), insert piston in hole of
casing.
Check whether piston sticks in hole.
Use piston seal jig.
(5)
Mount ball bearing (7) on shaft (6) by shrink fit.
Insert shaft in casing.
Take care not to damage oil seal.
(6)
Assemble swash plate (11) by matching its hole
and steel ball.
Take care not to damage sliding surface.
8-157
125LCR8TM33
125LCR8TM34
125LCR8TM35
125LCR8TM36