Hyundai HX145LCR Manual page 686

Overall assemble
(3)
Place a V-block on a rigid work bench.
Mount the tube assembly (1) on it and
fix the assembly by passing a bar
through the clevis pin hole to lock the
assembly.
Insert the rod assembly in to the tube
assembly, while lifting and moving the
rod assembly with a crane.
Be careful not to damage piston seal by
thread of tube assembly.
Match the bolt holes in the cylinder head
flange to the tapped holes in the tube
assembly and tighten socket bolts to a
specified torque.
Refer to the table of tightening torque.
Lift
Straight
Appply liquid packing
Turn clockwise
Apply loctite
8-214
Fix with a bar
21078DA41
Place rag
21078DA42