Hyundai HX145LCR Manual page 515

(17) Remove O-ring (19) from casing.
(18) Use a magnet to separate swash plate (7) from
casing.
※
Sliding surface should be carefully treated to
avoid scratches and damage.
(19) Disassemble shaft (3) and cylinderical roller
bearing (5).
※
Do not remove cylinderical roller bearing (5)
unless malfunction is detected, since it is
mounted by shrink fit.
(20) Turn casing (1) upside down and remove oil seal
(2) using jig.
8-52
125LCR8SM19
125LCR8SM20
125LCR8SM21
125LCR8SM22