Option "Product Name" Is; Port Properties" Option May Be Unavailable In Node List - HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note

Some IP Addresses must be Avoided
When you select IP addresses for edge switches and directors, and also if you
select a static IP address for the HAFM server, do not use IP addresses in the
following range:
Show Routes "Select a Source Node" Panel may be Blank
If you first logon to HAFM and immediately go to Fabric View and click
Fabrics > Show Route, the Select a Source Node panel may be blank.
Workaround
Going to a different view first, e.g., Product View or Hardware View for a
director or edge switch, will prevent this from occurring.
Director and Edge Switch may be Displayed With WWN even if Display
Option "Product Name" is Selected
In the Fabric View, the directors and edge switches may have their WWN
displayed as identifier even if Product Name is selected.
Workaround
Changing the Display Option to another setting and back to Product Name will
cause the Product Name of directors and edge switches to display correctly.
"Port Properties" Option may be Unavailable in Node List View
If you switch from Hardware View to Node List View, and choose the Product
menu, the Port Properties option may not be available.
Workaround
You must first select a line for a port in the Node List for the Port Properties
option to be available, no port is selected by default. Alternatively, Port
Properties may be viewed by right-clicking the line for a port in the Node List
and choosing Port Properties, or from other views like Hardware View or Port
List View.
HA-Fabric Manager Release Notes
192.168.0.0 through 192.168.0.255—This subnet is used internally to the
HAFM server. Using an IP address in this range causes the call-home feature
to function incorrectly.
Known Issues
15