Wireless Connection - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B
5.6.1.2
User Manual 5601.1343.02 ─ 02
When the connection is alive, the LXI icon turns green on the status bar.
Table 5-13: Ethernet input field
Ethernet input field
MAC Address
Status
IP Mode
IP Address
Subnet Mask
Default Gateway
LAN Reset
Apply

Wireless Connection

R&S NGE-K102 (order number: 5601.2210.03) option is required to connect the R&S
NGE100B to a network via WLAN connection.
WLAN connection
The LAN connection has a higher priority over WLAN.
If LAN is connected, the WLAN connection will be disconnected. When LAN is discon-
nected, WLAN will reconnect automatically.
1. Select "Interface > WLAN" menu item.
The R&S NGE100B displays the "WLAN" dialog. See
Allice Messtechnik GmbH
Instrument Functions
Connecting to a Network
Description
Shows the MAC address of this instrument.
Shows if the connection is up or down.
Static & Manual: Manually configure an IP address
for the instrument.
DHCP & Auto-IP: Automatically assign an IP
address to the instrument.
Address used in communication with the network.
Manually configure this field if IP Mode set to "Static
& Manual".
Secondary address used in communication with the
network.
Manually configure this field if IP Mode set to "Static
& Manual".
Gateway address to connect to the network.
Manually configure this field if IP Mode set to "Static
& Manual".
Restores the LAN settings to factory default.
It also removes the LXI web password.
Apply static IP settings.
Figure 5-21.
50