Menu - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B

5.1.5 Menu

User Manual 5601.1343.02 ─ 02
The R&S NGE100B menu provides access to the instrument's advanced functions and
some general settings. You can also obtain the instrument and service information via
the menu.
To access this mode:
1. Press Menu key on the front panel. The main menu screen appears.
Figure 5-6: Main menu
2. Navigate the menu via the rotary knob or arrow keys.
3. Press the rotary knob or Enter key to enter into the submenu.
4. Press key to return to the previous menu level or exit the menu mode if it is
already at the main menu level. Alternatively, press Menu key to exit the menu
mode from any menu level.
Table 5-4: Main menu hierarchy
Menu Descriptions
Output Menu items related to the instrument's advanced output functions.
Interface Menu items related to connection setup.
Device Menu items related to the instrument's general settings, reset function and infor-
mation about the instrument.
Utilities Menu items such as system test, firmware update function and information for
service.
Table 5-5: Output menu hierarchy
Menu Menu items
Output Protection
Fuse
Allice Messtechnik GmbH
Instrument Functions
Descriptions
Configures the OVP and OPP protection settings for the
instrument. See Chapter 5.5.1,
Configures the fuse delay and fuse linking function of the
channel. See Chapter 5.5.2, "Fuse",
User Interface
"Protection", on page 40.
on page 42.
32