Table of Contents
Advertisement
www.allice.de
®
R&S
NGE100B
6.5.2 System Commands
User Manual 5601.1343.02 ─ 02
Prevents servicing of the subsequent commands until all preceding commands have
been executed and all signals have settled (see also command synchronization and
*OPC).
Usage:
Event
The following commands perform the various system functions and configure the com-
munication interface (LAN, WLAN) for the instrument.
SYSTem:BEEPer[:IMMediate]
The instrument returns a single beep immediately.
Usage:
Event
SYSTem:LOCal
This command sets the system to front panel control. The front panel control is
unlocked.
Usage:
Event
SYSTem:REMote
This command sets the system to remote state. The front panel control is locked. By
pressing Remote, the front panel control will be activated.
Usage:
Event
SYSTem:RWLock
This command sets the system to remote state. The front panel control is locked. You
are only able to unlock the front panel control via SCPI command
on page 76.
Usage:
Event
SYSTem:OPTion?
This command returns the list of options installed on the instrument.
Return values:
<arg0>
Usage:
Query only
Allice Messtechnik GmbH
Remote Control
Remote Control - Commands
SYSTem:LOCal
76
Advertisement
Table of Contents
