R&S NGE-K101 User Manual page 99

www.allice.de
®
R&S NGE100B
User Manual 5601.1343.02 ─ 02
Parameters:
<Current> *RST:
Default unit: A
TRIGger:OUT:SOURce:DIO<IO> <arg0>
This command sets or queries the control source of the trigger output of the specified
Digital I/O line.
Suffix: .
<IO> 1..4
Parameters:
<arg0> CH1 | CH2 | CH3
*RST:
TRIGger:OUT:VOLTlevel:DIO<IO> <Voltage>
This command sets or queries the threshold voltage level of the the trigger output of
the specified Digital I/O line.
Triggers when output voltage level exceeds or equals to the set level.
Suffix: .
<IO> 1..4
Parameters:
<Voltage> *RST:
Default unit: V
TRIGger:RCL <arg0>
This command recalls DIO settings from the respective memory locations M1-M5.
Parameters:
<arg0> Range:
Example: TRIG:RCL 1
Usage: Setting only
TRIGger:SAV <arg0>
This command saves DIO settings into the respective memory locations M1-M5
Parameters:
<arg0> Range:
Example: TRIG:SAV 1
Usage: Setting only
Allice Messtechnik GmbH
Remote Control - Commands
3.000
CH1
0.0
0..4
0..4
Remote Control
97