Instrument Functions; User Interface; Screen Layout - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B

5 Instrument Functions

5.1 User Interface

5.1.1 Screen Layout

User Manual 5601.1343.02 ─ 02
The following chapters describe the operating procedures of the R&S NGE100B user
interface and functions.
This chapter describes how you can interact with R&S NGE100B via the various keys,
menus and navigation controls in the instrument.
Figure 5-1: Screen layout for 3-channel or 2-channel instrument
Status bar
Table 5-1: Status bar function
Function
EasyArb
EasyRamp
DIO:xxxx
LXI
Description
Arbitrary output sequences on Ch 1.
Output voltage to ramp continuously within a 10 ms to 10 s until set volt-
age, V .
set
Digital Trigger I/O (Digital Trigger I/O option NGE-K103 must be installed).
The "xxxx" refers to I/O status for DIO1, DIO2, DIO3, DIO4.
Wireless LAN connection (WLAN option R&S NGE-K102 must be instal-
led).
Wired LAN connection with LXI service for remote control operation
(Ethernet option R&S NGE-K101 must be installed).
Allice Messtechnik GmbH
Instrument Functions
User Interface
25