R&S NGE-K101 User Manual page 80

www.allice.de
®
R&S NGE100B
User Manual 5601.1343.02 ─ 02
SYSTem:COMMunicate:WLAN:DISConnect
The instrument stops the connection to the predefined wireless access point.
Available only if option R&S NGE-K102 is installed.
Usage: Event
SYSTem:COMMunicate:WLAN:IPADdress?
This command queries the IP address of the device when the wireless interface works
as a client.
Available only if option R&S NGE-K102 is installed.
Return values:
<arg0>
Usage: Query only
SYSTem:COMMunicate:WLAN[:STATe] <arg0>
This command activates/deactivates or queries the enable state of the wireless inter-
face.
Available only if option R&S NGE-K102 is installed.
Parameters:
<arg0>
SYSTem:COMMunicate:WLAN:PASSword <arg0>
This command defines the password string of the Access Point when the wireless
interface works as a client.
Available only if option R&S NGE-K102 is installed.
Parameters:
<arg0>
Usage: Setting only
SYSTem:COMMunicate:WLAN:SSID <arg0>
This command defines or queries the SSID string of the access point when the wire-
less interface works as a client.
Available only if option R&S NGE-K102 is installed.
Parameters:
<arg0>
Allice Messtechnik GmbH
Remote Control
Remote Control - Commands
78