Table of Contents
Advertisement
www.allice.de
®
R&S
NGE100B
1 Preface
1.1 Documentation Overview
User Manual 5601.1343.02 ─ 02
This section provides an overview of the R&S NGE100B user documentation. You find
it on the product page at:
http://www.rohde-schwarz.com/product/nge100b
Getting started manual
Introduces the R&S NGE100B and describes how to set up and start working with the
product. A printed version is included in the delivery.
User manual
The user manual contains the description of all instrument modes and functions. It also
provides an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance, instrument
interfaces and error messages.
Service manual
The service manual is available for registered users on the global Rohde & Schwarz
information system (GLORIS, https://gloris.rohde-schwarz.com).
Basic safety instructions
Contains safety instructions, operating conditions and further important information.
The printed document is included in the delivery.
Brochure
The brochure provides an overview of the R&S NGE100B and shows its specific char-
acteristics. The technical specifications of the R&S NGE100B are included in the bro-
chure. It also lists the options and their order numbers as well as optional accessories.
Calibration certificate
The calibration certificates of your device are available online. Visit the R&S NGE100B
product page and select the item to download the calibration certificate. You will be for-
warded to a Gloris page.
https://gloris.rohde-schwarz.com/calcert.
Enter the device ID of your R&S NGE100B and download the certificate. You can find
the device ID either in the "Setup" menu or on the label on the rear panel.
Allice Messtechnik GmbH
Documentation Overview
> "Downloads"
Preface
7
Advertisement
Table of Contents
