Easyarb - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B

5.5.3 EasyArb

User Manual 5601.1343.02 ─ 02
● "Disabled": Ch 1 is not linked to any other channels.
EasyArb function
The arbitrary function is available only in Ch 1.
The R&S NGE100B series allows you to generate freely programmable waveforms
which can be reproduced within the limits set by the instrument for voltage and current.
1. Select "Output > EasyArb" menu item.
The R&S NGE100B displays the "EasyArb" dialog. See
Figure 5-16: EasyArb dialog
2. Set "EasyArb Mode" to "Enabled".
The R&S NGE100B enabled the EasyArb function for Ch 1.
Note: If "EasyArb Mode" is set disabled, corresponding output state of Ch 1 is also
disabled.
3. Set the desired data points for the EasyArb function.
The R&S NGE100B displays the number of EasyArb entry points in the EasyArb
table.
4. Set the desired repetition cycle for the EasyArb function
5. Configure the EasyArb table with the desired values for voltage, current and dura-
tion.
6. Press "Apply" to save the EasyArb settings.
The EasyArb data points are sent to Ch 1.
7. Press "Clear" to reset the EasyArb table values.
All the EasyArb data points are clear from Ch 1.
See Table 5-9.
8. Press Menu key to return to the
Allice Messtechnik GmbH
Figure
Channel display area.
Instrument Functions
Advanced Functions
5-16.
43