Dio Commands - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B

6.5.14 DIO Commands

User Manual 5601.1343.02 ─ 02
ARBitrary:STOP
This command stops the EasyArb waveform in channel 1 if EasyArb is running.
Usage: Event
TRIGger:DIRection:DIO<IO> <arg0>
This command sets or queries the specified Digital I/O line to function as Trigger Input
or Trigger Output.
Suffix: .
<IO> 1..4
Parameters:
<arg0> OUTPut | INPut
TRIG:DIR:DIO2 OUT
Example:
TRIGger[:ENABle]:DIO<IO> <arg0>
This command sets or queries the state of the specified Digital I/O line.
The state is disabled when any setting has been changed
Suffix: .
<IO> 1..4
Parameters:
<arg0> {OFF | ON}
ON
Enable the state for Digital I/O line.
OFF
Disable the state for Digital I/O line.
TRIGger:IN:ARBitrary:DIO<IO> <arg0>
This command sets or queries the operation mode when starting EasyArb by Trig IN.
Suffix: .
<IO> 1..4
Allice Messtechnik GmbH
Remote Control
Remote Control - Commands
93