Updating The Firmware - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B

5.7.6 Updating the Firmware

User Manual 5601.1343.02 ─ 02
System Test
Screen Test
Key Backlight Test
Beeper Test
Fan Test
The latest firmware file can be found from the product homepage
schwarz.com/product/nge100b.
For firmware update using SCPI command, see
for version 1.3 and above"
Do not power off or operate the instrument during a firmware update.
Do not rename the firmware filename NGE100FWRelease.tar.gz.enc and
NGE100FWRelease.fwp.
1. Download the firmware file from the product homepage.
2. Unzip the firmware to the root directory of a USB flash drive.
There are two files after the unzip, do not rename these files.
3. Connect the USB flash drive to the USB port of the instrument and wait for ten sec-
onds.
4. Press Menu key.
The R&S NGE100B displays the main menu of the instrument. See
"Menu", on page 32.
5. Select "Utilities > Update" menu item.
If firmware file is found, the R&S NGE100B displays the "Update" dialog. See
ure 5-29.
Description
Test that the display is working. RGB and a list of
supported colors should appear on the screen dur-
ing the test.
Test that the key backlight is working. All the keys
on the front panel except the softkeys (M1, M2, M3,
M4, M5) and Store Recall key should illuminate
during the test.
Test that the instrument sound is working. Three
beep sounds should be heard during the test.
Test that the cooling fan is working.
"Firmware update via SCPI command
on page 57.
Allice Messtechnik GmbH
Instrument Functions
General Instrument Settings
http://www.rohde-
Chapter 5.1.5,
Fig-
56