Table of Contents
Advertisement
www.allice.de
®
R&S
NGE100B
5.4.2 Tracking Function
User Manual 5601.1343.02 ─ 02
The setting of current value corresponds to the I
advisable to set the current limit prior to operating the instrument to prevent damage to
the load and instrument in the case of malfunction like short-circuit.
1. Press Voltage or Current key.
The previous set channel will be selected.
The channel font changes to blue and all the navigation controls illuminate.
Selected Voltage or Current key and the channel key are also illuminated.
2. Press the desired channel key to switch to that channel.
Selected channel key (Ch 1, Ch 2, Ch 3) illuminates.
3. Enter the desired voltage or current value.
4. Press the rotary knob, Voltage/Current or Enter key to confirm the value.
The selected channel font text changes to yellow.
Figure 5-10: Voltage and current settings in the instrument
See
Chapter 5.1.4.3,
"Live-Mode",
age and current values.
See also
General Instrument Settings
For power supplies with multiple channels, the channels can be linked such that
changes made on one channel are applied to the tracked channel.
For example, the channel 1 output supplies 6 V, intended for digital logic. The other two
supplies 20 V, which can be used with bipolar analog circuitry. The tracking adjust-
ments are applied to the two 20 V supplies so that the + and - 20 V supplies can be
adjusted together.
1. Press Track key.
The R&S NGE100B activates the tracking function and the Track key illuminates.
Previous selected channel and Voltage keys are also illuminated.
2. Press the tracked channels.
The selected tracked channel keys (Ch 1, Ch 2, Ch 3) illuminate.
Allice Messtechnik GmbH
of the respective channel. It is
max
on page 31 for alternative way to configure the volt-
on the keypad for setting the fallback time.
Instrument Functions
Basic Functions
36
Advertisement
Table of Contents
