Managing Options - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B

5.7.3 Managing Options

User Manual 5601.1343.02 ─ 02
General instrument settings
Keypad
Display
Sound
Options are enabled by entering a registered license key code.
You may choose to install from an xml file on USB or by manually entering the key
code.
► Select "Device > License" menu item.
The R&S NGE100B displays the "License" dialog. See
Figure 5-26: License dialog
To install from an xml file, proceed as follows:
1. Copy the xml file containing the registered key code into the USB flash drive.
2. Connect the USB flash drive to the USB port of the instrument.
3. Select "Install".
If the installation is successful, the option is marked as "Installed" under Installation
Status.
To manually enter the key code, proceed as follows:
1. Press Enter key to invoke the
2. Enter the key code (30-digit number) of the option in the entry box.
Allice Messtechnik GmbH
General Instrument Settings
Description
Selects the wait time before the instrument automat-
ically leaves the editing mode. Select "Off" to dis-
able the automatic switching back.
Selects the specific screen intensity to control the
screen brightness. Setting is applied immediately.
Selects the event where sound is generated.
●
Fault Events: Sounds on faulty events only
●
Any Event: Sounds on faulty events and key
press events
●
Disabled: No sound is generated
Virtual Keyboard.
Instrument Functions
Figure 5-26.
54