Virtual Keyboard - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B

5.1.3 Virtual Keyboard

User Manual 5601.1343.02 ─ 02
Function keys Description
Voltage Sets the output voltage for the channel. See
on page 35.
Current Sets the output current limit for the channel. See
on page 35.
Track Configures the tracking function. See
on page 36.
Menu Main menu of the instrument. See
Long press on Menu key to capture screenshot on the USB stick. The default
screenshot filename starts with a prefix nge100_scr_ follows by an ascending
index 000-999 (e.g. nge100_scr_001.bmp).
Remote Long press on Remote key to switch from remote to local control mode.
Fuse Toggles the fuse on/off. See
Navigation keys
These keys provide navigation control in the instrument.
Function keys Description
Enter Confirms menu selection or entry in dialog boxes.
Start and stop (long press) the EasyArb function. See
on page 43.
Returns to the previous menu level or exit the menu mode.
Back
In the menu dialog, press the Back key to discard changes and restore the previ-
ous value.
In the channel display area, press the Back key to exit editing mode and keep the
changes made.
In a 2 channel instrument, long press on Back key also reset the channel history
information. See
The virtual keyboard is an on-screen keyboard to input symbols and alphanumeric
characters in the input field. It can be invoked wherever there is an input field.
Allice Messtechnik GmbH
"Set output voltage and current"
Chapter 5.4.2, "Tracking
Chapter 5.1.5,
Chapter 5.5.2, "Fuse",
Table 5-3
Instrument Functions
User Interface
"Set output voltage and current"
Function",
"Menu", on page 32.
on page 42.
Chapter 5.5.3, "EasyArb",
29