Table of Contents
Advertisement
www.allice.de
®
R&S
NGE100B
User Manual 5601.1343.02 ─ 02
Parameters:
<arg0>
PULSe | LEVel
PULSe
Starts EasyArb when trigger signal activated.
LEVel
Starts EasyArb when trigger signal activated and stops when
trigger signal de-activated.
*RST:
Example:
TRIG:IN:ARB:DIO1 PULS
TRIGger:IN:RESPonse:DIO<IO> <arg0>
This command sets or queries the output response of the trigger input of the specified
Digital I/O line.
Suffix:
.
<IO>
1..4
Parameters:
<arg0>
ON | OFF | TOGGle | INHibit | ARBitrary
ON
Output is switched on.
OFF
Output is switched off.
TOGGle
Output state is toggled.
INHibit
Output state remains off as long as the TRIG IN signal is activa-
ted.
ARBitrary
Starts the EasyArb function. If level signal is selected, the Easy-
Arb function is stopped when TRIG IN signal is deactivated.
*RST:
TRIGger:IN:SOURce:DIO<IO> <arg0>
This command sets or queries the source under control of the trigger input of the speci-
fied Digital I/O line.
Suffix:
.
<IO>
1..4
Allice Messtechnik GmbH
Remote Control - Commands
PULSe
OFF
Remote Control
94
Advertisement
Table of Contents
