R&S NGE-K101 User Manual page 97

www.allice.de
®
R&S NGE100B
User Manual 5601.1343.02 ─ 02
Parameters:
<arg0> CH1 | CH2 | CH3
CH1
Trigger input source from Ch 1.
CH2
Trigger input source from Ch 2.
CH3
Trigger input source from Ch 3.
*RST:
TRIGger:LOGic:DIO<IO> <arg0>
This command sets or queries the trigger logic (Active High/Active Low) of the speci-
fied Digital I/O line..
Suffix: .
<IO> 1..4
Parameters:
<arg0> LOW | HIGH
*RST:
TRIGger:OUT:CONDition:DIO<IO> <arg0>
This command sets the trigger condition of the trigger output of the specified Digital I/O
line.
The line triggers when the output of the specified control source is turned off or on
Suffix: .
<IO> 1..4
Allice Messtechnik GmbH
Remote Control - Commands
CH1
HIGH
Remote Control
95