6�20�- Tariff Selection (Models Cvm-E3-Mini-Xxx-Wieth); 6�21�- Backlight, Turning On The Backlit Display - Circutor CVM-E3-MINI Instruction Manual

CVM-E3-MINI
6�20�- TARIFF SELECTION (Models CVM-E3-MINI-xxx-WiEth)
You can select the operating tariff on this screen.
key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
Press the
screen.
Press key to browse the two options.
 Configuration values
To validate the value, press the
Press key to access the next programming step.
6�21�- BACKLIGHT, TURNING ON THE BACKLIT DISPLAY
This screen is used to programme the maximum brightness time of the display since the device was
last used with the keypad. After this time, the display will reduce the brightness level.
key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
Press the
screen.
Press the key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the
Instruction Manual
Table 50: Configuration values: Tariff�
t1
Possible values
t2
key for 3 seconds; the prog icon will stop flashing.
Tariff
Tariff 1
Tariff 2
and keys to move the edit cursor.
77