Table of Contents
Advertisement
DISPLAY BUTTON
When the DISPLAY button on the remote control
is pressed, the displays in the viewfinder will
change as follows.
AE.100
O-OO'OO
1
<_1
Linear time counter
(cannot be moni¬
tored on the TV)
Linear time counter
with memory
(can be monitored
on the TV)
LINEAR TIME COUNTER
Shows length of tape run in hours, minutes and
seconds.
When the camera/recorder is turned on, the lin¬
ear time counter appears in the viewfinder.
Load a cassette into the camera/recorder and per¬
form recording or playback; the counter indicates
the elapsed time.
Press the COUNTER RESET
button on the remote control to reset the counter
to "0:00:00".
NOTE: Counter changes to 0:00:00 when cassette
is ejected.
MEMORY
When the linear time counter with memory indi¬
cation appears in the viewfinder, a tape that is
being rewound automatically stops when the
counter reads approximately "0:00:00M". This is
useful if there is a section of tape you want to
review immediately after recording or if you want
to return to the same point several times in a row.
1. Press the DISPLAY button on the remote con¬
trol so the linear time counter with memory
appears.
2. Start playing or recording a tape.
3. At the point you want playback to start, press
COUNTER RESET button on the remote con¬
trol to reset the counter to "0:00:OOM".
4. Continue to play or record.
5. Press STOP button.
6. Press REW button. The tape will be rewound
to the preselected point, at approximately
"0:00:00M" indication.
NOTE: The tape will also stop approximately at
"0:00:00M" during fast forward mode.
Advertisement
Table of Contents
