Connecting Up; Preparing The Cable - Rj45 Connections - Motorola PTP 400 Series User Manual

The length of the safety lanyard must not exceed 1m (approx 3 ft) in length. The lanyard
should be made from a material that does not degrade in an outdoor environment.
The safety lanyard must be fixed to a separate fixing point that is not part of the direct
mounting system for the ODU.
7.7

Connecting Up

7.7.1 Preparing The Cable — RJ45 connections
Cables should be prepared using the following instructions along with the cable and
connector supplier's instructions:
Step 1: Assemble gland Step on cable as
Step 3: Arrange conductors as shown in
Figure 19 and cut to length
shown
52
Step 2: Strip the outer insulation
Step 4: Insert conductors and crimp