Connecting A Pc; Multilab Importer - wtw VWR MU 6100 H Operating Manual

MU 6100 H
Installation of the
USB driver on the
PC
ba77077e06 05/2021

13.2 Connecting a PC

Connect the MU 6100 H to the PC via the USB interface.
NOTE
When connecting an grounded PC/printer, measurements cannot be
performed in grounded media as the values would be incorrect.
The USB interface is not galvanically isolated.
System requirements of the PC for installation of the USB driver:
1. Insert the supplied installation CD in the CD drive of your PC.
2. Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3. Connect the MU 6100 H to the PC via the USB interface.
The meter is listed as a virtual COM interface among the connections in
the Windows instrument manager.

13.3 MultiLab Importer

With the aid of the MultiLab Importer software, you can record and evaluate
measurement data with a PC.
More detailed information can be found in the MultiLab Importer
operating manual.
Transmitting data (USB interface)
81