Transmitting data (USB interface)
Installation of the
USB driver on the
PC
42
8.2
Connecting a PC
Connect the Cond 7310 to the PC via the USB interface.
NOTE
When connecting a grounded PC, measurements cannot be performed
in grounded media as the values would be incorrect.
The USB interface is not galvanically isolated.
System requirements of the PC for installation of the USB driver:
PC with Pentium processor or higher with at least one free USB connection
and CD-ROM drive
Windows 2000, XP, Vista, 7.
1.
Insert the supplied installation CD in the CD drive of your PC.
2.
Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3.
Connect the Cond 7310 to the PC via the USB interface.
The meter is listed as a virtual COM interface among the connections in
the Windows instrument manager.
8.3
MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measurement data with a PC.
More detailed information can be found in the MultiLab Importer
operating manual.
Cond 7310
ba75933e04
06/2013