Oxi 3315
ba75944e02
03/2012
8.4
Options for data transmission to a PC
Via the USB-B interface you can transmit data to a PC. The following table
shows which data are transmitted to the interface in which way:
Data
Control
Current
Manual
measured
values of all
connected
sensors
Automatic, at
intervals
Stored mea-
Manual
sured values
calibration
Manual
records
Automatic
The following rule applies: With the exception of the menus, shortly
pressing the <F2>/[USB output] key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).
8.5
MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measuring data with a PC.
More detailed information can be found in the MultiLab Importer
operating manual.
Transmitting data (USB interfaces)
Operation / description
With <F2>/[USB output].
Simultaneously with every manual
data storage process (see section 7.1
M
, page 38).
ANUAL STORAGE
With <F2__>/[USB output].
Then you can set the transmission
interval.
Simultaneously with every automatic
data storage process (see section 7.2
A
UTOMATIC STORAGE AT INTERVALS
page 39).
Displayed dataset with <F2>[USB out-
put] after calling up from the data stor-
age.
All datasets with the Output to RS232/
USB function.
(see section 7.3.1 E
SUREMENT DATA STORAGE
Calibration record with <F2>/[USB out-
put] (see section 5.3.6 C
, page 31).
DATA
At the end of a calibration procedure.
,
-
DITING THE MEA
, page 41).
ALIBRATION
45