Connecting A Pc; Multilab Importer - wtw Avantor VWR pH 1100 L Operating Manual

pH 1100 L
Installation of the USB
driver on the PC
ba77068d05 05/2021

5.6.2 Connecting a PC

Connect the pH 1100 L to the PC via the USB interface.
Attention
The USB interface is not galvanically isolated.
When a grounded PC is connected, measurements cannot be per-
formed in grounded media as incorrect values would result.
System requirements of the PC for installation of the USB driver:
 PC with USB port and CD-ROM drive
 Microsoft Windows
(for details, see enclosed installation CD, Driver directory)
1 Insert the supplied installation CD in the CD drive of your PC.
2 Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3 Connect the pH 1100 L to the PC via the USB interface.
The meter is listed as a virtual COM interface among the con-
nections in the Windows instrument manager.
5.7

MultiLab Importer

With the aid of the MultiLab Importer software, you can record and eval-
uate measurement data with a PC.
More detailed information can be found in the MultiLab
Importer operating manual.
Operation
53