Transmitting data (USB interface)
46
8.4
Options for data storage to a PC
Via the USB-B interface you can store data to a PC. The following table shows
which data are transmitted to the interface in which way:
Data
Control
Current
Manual
measured
values of all
connected
sensors
Automatic, at
intervals
Stored mea-
Manual
sured values
Calibration
Manual
records
Automatic
The following rule applies: With the exception of the menus, shortly
pressing the <F2>/[USB output] key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).
8.5
MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measurement data with a PC.
More detailed information can be found in the MultiLab Importer
operating manual.
Oxi 3310 IDS (Oxi 3315)
Operation / description
With <F2>/[USB output].
Simultaneously with every manual
data storage process (see section 7.1
M
, page 39).
ANUAL STORAGE
With <F2__>/[USB output].
Then you can set the transmission
interval.
Simultaneously with every automatic
data storage process (see section 7.2
A
UTOMATIC DATA STORAGE AT INTER
, page 40).
VALS
Displayed dataset with <F2>[USB out-
put] after calling up from the memory.
All datasets with the Output to RS232/
USB function.
(see section 7.3.1 E
SUREMENT DATA MEMORY
Calibration record with <F2>/[USB out-
put] (ssection 5.3.6 C
page 31).
At the end of a calibration procedure.
-
-
DITING THE MEA
, page 42).
,
ALIBRATION DATA
ba75944e02
10/2014