Cond 3310 IDS
Menu item
System / Interface / Out-
put format
System / Interface /
Decimal separator
System / Interface / Out-
put header
System / Clock function
System / Service informa-
tion
System / Reset
ba77051e04
07/2017
Possible setting
ASCII
CSV
Dot (xx.x)
Comma (xx,x)
Date format
Datum
Time
-
6.2.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values.
Detailed information on the memory functions of the
Cond 3310 IDS are given in section 7 D
6.2.3 Automatic Stability control
The automatic Stability control (AutoRead) function continuously checks the
stability of the measurement signal. The stability has a considerable impact on
the reproducibility of measured values.
You can activate or switch off the automatic Stability control function (see
section 6.2 S
-
ENSOR
INDEPENDENT SETTINGS
The measured parameter flashes on the display
as soon as the measured value is outside the stability range
when the automatic Stability control is switched off.
6.2.4 Automatic switch-off function
The instrument has an automatic switch-off function in order to save the
batteries (see section 6.2.1 S
switches off the meter if no key is pressed for an adjustable period.
Explanation
Output format for data transmission
For details, see section 8 T
), page 43
INTERFACE
Decimal separator
Output of a header for Output format: CSV
Settings of time and date.
For details, see section 4.4.5 E
: S
TION
ETTING THE DATE AND TIME
Hardware version and software version of the meter
are displayed.
Resets the system settings to the default values.
For details, see section 6.3.2 R
, page 35
TEM SETTINGS
, page 32).
, page 32). The automatic switchoff function
YSTEM
Settings
(USB
RANSMITTING DATA
2
XAMPLE
ON NAVIGA
, page 22
ESETTING THE SYS
, page 37.
ATA MEMORY
-
-
33