Data Storage; Automatic Stability Control - wtw Avantor VWR pH 1100 L Operating Manual

pH 1100 L
ba77068d05 05/2021
Menu item
System / Interface /
Output format
System / Interface /
Decimal separator
System / Interface /
Output header
System / Clock
System / Service infor-
mation
System / Reset

5.3.2 Data storage

This menu contains all functions to display, edit and erase stored mea-
sured values and calibration records.
Note
Detailed information on the memory functions of the pH 1100 L is given
in section 5.5.

5.3.3 Automatic Stability control

The automatic Stability control (AutoRead) function continuously
checks the stability of the measurement signal. The stability has a con-
siderable impact on the reproducibility of measured values.
You can activate or switch off the automatic Stability control function
(see section 5.4.4).
The measured parameter flashes on the display
 as soon as the measured value is outside the stability range
 when the automatic Stability control is switched off.
Setting Explanation
ASCII Output format for data
CSV transmission
For details, see section 5.6
Dot (xx.x) Decimal separator
Comma (xx,x)
Output of a header for Out-
put format: CSV
Time Settings of time and date.
Date For details, see section
Date format 5.2.4
Hardware version and soft-
ware version of the meter
are displayed.
- Resets the system settings
to the default values.
For details, see section
5.8.2
Operation
27