Outputting The Data Storage - wtw inoLab Cond 730 Operating Manual

Operation
Switching off the
AutoStore
Outputting to the
display
40
Note
The AutoStore function is interrupted if you perform other
functions, e.g. output data storage.
After completing the other function, the AutoStore function
continues. However, as a result, gaps can occur in the
recording of the measured values.
Switch off the AutoStore function by:
l
Setting the storage interval (Int 1) to OFF or
l
Switch the conductivity meter off and on again.

4.5.3 Outputting the data storage

The contents of the data storage can be output to the:
l
display
l
printer/interface
r
1 Press the
on the display.
g
2 Press the
A measured value appears on the display.
The I. D. number of the data record appears for
approx. 2 s.
key repeatedly until Sto disp appears
key.
Cond 730