Activating The Channels Output; Storing/Recalling Of Instrument Settings - R&S NGE100B User Manual

®
R&S NGE100B

4.3.3 Activating the channels output

The output voltages can be switched on or off regardless of the operating mode of the
instrument.
To activate the channel output, press the [Output] key on the front panel followed by
the desired channel key or vice versa.
Depending on the instrument operating mode, the display font color changes to green
in CV (constant voltage) mode and red in CC (constant current) mode.

4.3.4 Storing/Recalling of instrument settings

The instrument settings can be stored in the instrument memory by long pressing the
[Store Recall] key followed by the desired memory location key ([M1] to [M5]). The pre-
vious saved settings are overwritten.
To retrieve the settings, press [Store Recall] key and select the desired memory loca-
tion key ([M1] to [M5]).
User Manual 5601.1343.02 ─ 09
Getting started
Trying out the instrument
26