Table of Contents
Advertisement
®
R&S
NGE100B
TRIGger:IN:ARBitrary:DIO<IO> <arg0>
This command sets or queries the operation mode when starting EasyArb by Trig IN.
Suffix:
<IO>
Parameters:
<arg0>
Example:
TRIGger:IN:RESPonse:DIO<IO> <arg0>
This command sets or queries the output response of the trigger input of the specified
Digital I/O line.
Suffix:
<IO>
Parameters:
<arg0>
TRIGger:IN:SOURce:DIO<IO> <arg0>
This command sets or queries the source under control of the trigger input of the speci-
fied Digital I/O line.
User Manual 5601.1343.02 ─ 09
.
1..4
PULSe | LEVel
PULSe
Starts EasyArb when trigger signal activated.
LEVel
Starts EasyArb when trigger signal activated and stops when
trigger signal de-activated.
*RST:
PULSe
TRIG:IN:ARB:DIO1 PULS
.
1..4
ON | OFF | TOGGle | INHibit | ARBitrary
ON
Output is switched on.
OFF
Output is switched off.
TOGGle
Output state is toggled.
INHibit
Output state remains off as long as the TRIG IN signal is activa-
ted.
ARBitrary
Starts the EasyArb function. If level signal is selected, the Easy-
Arb function is stopped when TRIG IN signal is deactivated.
*RST:
OFF
Remote control commands
Advanced operating commands
98
Advertisement
Table of Contents
