Table of Contents
Advertisement
®
R&S
NGE100B
Parameters:
<Value>
*ESR?
Event status read
Returns the contents of the event status register in decimal form and then sets the reg-
ister to zero.
Return values:
<Contents>
Usage:
*IDN?
Identification
Returns the instrument identification.
Return values:
<ID>
Example:
*OPC
Operation complete
Sets bit 0 in the event status register when all preceding commands have been execu-
ted. This bit can be used to initiate a service request. The query writes a "1" into the
output buffer when all preceding commands have been executed, which is useful for
command synchronization.
*OPT?
Option identification query
Queries the options included in the instrument. For a list of all available options and
their description, refer to the data sheet.
Usage:
*RST
Reset
Sets the instrument to a defined default status. The default settings are indicated in the
description of commands.
Usage:
User Manual 5601.1343.02 ─ 09
Range:
0 to 255
Range:
0 to 255
Query only
"Rohde&Schwarz,<device type>,<part number>/serial num-
ber>,<firmware version>"
Rohde&Schwarz,NGE103B,5601.1414k03/100421,1.20
Query only
Setting only
Remote control commands
Common setting commands
71
Advertisement
Table of Contents
