Table of Contents
Advertisement
®
R&S
NGE100B
Figure 6-24: License dialog
Install via USB
To install from an XML file, proceed as follows:
1. Copy the XML file containing the registered key code into the USB flash drive.
2. Connect the USB flash drive to the USB port of the instrument.
3. Select "Install via USB" > "Install".
If the installation is successful, the option is marked as "Installed" under "Installa-
tion Status".
Install via key entry
To manually enter the key code, proceed as follows:
1. Press [Enter] key to invoke the
2. Enter the key code (30-digit number) of the option in the entry box.
3. Select "Install key" >"Install".
If the correct key code is entered, the option is marked as "Installed".
If an invalid key code is entered, an error message is displayed. Re-enter the cor-
rect key code.
6.10.4 Reset instrument
This function resets the instrument to factory default settings.
The following settings are reset to default:
► Select "Reset" menu item.
The R&S NGE100B displays the "Reset" dialog. See
User Manual 5601.1343.02 ─ 09
On-screen
keyboard.
Figure
Instrument functions
General instrument settings
6-25.
66
Advertisement
Table of Contents
