Activating The Channels Output; Storing/Recalling Of Instrument Settings - R&S NGA100 Series Getting Started

®
R&S NGA100
5.3

Activating the Channels Output

The output voltages can be switched on or off regardless of the operating mode
of the instrument.
To activate the channel output, press the [Output] key on the front panel followed
by the desired channel key or vice versa.
For single channel models, press the [Output] key to activate the channel output.
Depending on the instrument operating mode, the display font color changes to
green in CV (constant voltage) mode and red in CC (constant current) mode.
5.4

Storing/Recalling of Instrument Settings

The instrument settings can be stored in the instrument memory by long pressing
the [Store Recall] key followed by the desired memory location key ([M1] to [M5]).
The previous saved settings are overwritten.
To retrieve the settings, press [Store Recall] key and select the desired memory
location key ([M1] to [M5]).
Getting Started 5601.8902.02 ─ 06
Trying Out the Instrument
Storing/Recalling of Instrument Settings
24